14
other hard surfaces.
15. Do not aerate if the ground is extremely hard or dry. If ground is too dry,
sprinkle or water for one to two hours prior to use.
16. Do not aerate if the ground is too wet (muddy).
17. Vehicle braking and stability may be affected with the attachment of this
equipment.
18. Never exceed 5mph when towing the aerator spreader.
19. DO NOT exceed load capacity of 175lbs.
20.
Always move the flow control lever to the “Off “ position to prevent
excessive release of fertilizer when stopping, turning or filling the aerator
spreader.
6. MAINTENANCE AND STORAGE
MAINTENANCE
● Rinse/dry inside and outside of the aerator spreader after each use.
● Before operating make sure the tires have the RECOMMENDED TIRE
PRESSURE.
●
Regularly grease axle and wheel bearing area or when needed.
● Periodically check all fasteners for tightness.
● Annually clean and lightly lubricate spike assembly and shaft or when needed.
● Use a glossy enamel spray paint to touch up scratched or worn painted metal
surfaces.
● Spikes periodically need to be sharpened with a small grinder to maintain good
penetration.
● Never exceed load capacity rating of 175lbs it will damage the equipment..
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s
specifications. Replacement parts that do not meet specifications may result in a
safety hazard or poor operations.
STORAGE
● Never allow material to be stored in the hopper for extended periods of time.
● Before storing make sure the aerator spreader is clean and dry for years of
trouble free service.
● Lightly lubricate all metal surfaces and moving parts to prevent rust.
● Store indoors or protected area during severe weather and winter months.