7
3. ASSEMBLY
STEP 1: Attach Tow Bar Assembly to the Hopper
1. Remove the two M6 lock nuts in the bottom front of the hopper (Pic.1).
2. Put a M14 hex nut and Ø14 big washer to the support strut of the fluted disc
assembly, then attach the support strut to the card slot of the tow bar, and tighten
with a Ø14 big washer and M14 hex nut. (Pic.1).
3. Insert the original bolts through the holes on the beveled side of the tow bar
assembly. Secure using the M6 lock nuts (Pic.2).