![background image](http://html1.mh-extra.com/html/neilsen/ct2206/ct2206_instruction-manual_3929572013.webp)
12
STEP 7: Installing Control Rod
1. Push the handle gauge to the lowest position and insert the upper end of
control rod into the hole on the adjustable handle.
2. Remove one of nuts from threaded pole and insert the nut through the hole of
pivot & bracket and threaded pole and tighten.
3. Insert the threaded pole of adjustable pole B into the hole of adjustable plate,
and then put the lock nut M6 and flat washer Ø6.
4. Insert R Pin into the hole of turning axle at the bottom of hopper as shown.
Summary of Contents for CT2206
Page 19: ...18 8 PARTS DRAWING...