7
STEP 2: Install Wheel Assembly Frame on the Gear Box
1. Make sure the hole on axle of gear box is on the right side of the assembly as
shown below. Attach one end of frame brace to hopper frame assembly using
bolts M6 x 35 and lock nuts M6.
2. Insert two bolts M6 x 35 into the connecting cross rod through the wheel
assembly frames and frame braces. Insert bolts M6x60 through the wheel
assembly frames onto hopper frame assembly, put on lock nuts M6 and loosely
tighten.
Bolt M6x35
Summary of Contents for CT2206
Page 19: ...18 8 PARTS DRAWING...