Mini SAS 4i Adapter installation
Introduction
This document describes how to use the Mini-SAS 4i Internal Adapter to connect a SAS Host Bus
Adapter (HBA) with Mini-SAS 4i connectors for internal data connections to internal blind mate SAS
hard drives in HP 600 and 800 Workstations.
Warnings and cautions
WARNING!
Any surface or area of the equipment marked with this symbol indicates the presence
of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open any enclosed
area marked with this symbol.
WARNING!
To reduce the risk of electric shock or damage to your equipment:
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
— Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
WARNING!
Any surface or area of the equipment marked with this symbol indicates the presence
of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce
the risk of injury from a hot component, enable the surface to cool before touching.
CAUTION:
Static electricity can damage the electronic components of the workstation. Before
beginning these procedures, be sure you discharge static electricity by briefly touching a grounded metal
object.
Japanese
日本語
This document is available in Japanese. See
http://www.hp.com/support/workstation_manuals
, then
select your workstation product and select
Japanese
from the drop down
Manual Language
menu.
このドキュメントは日本語版が用意されています。
http://www.hp.com/support/workstation_manuals
にアクセスし、ご使用のワークステーション製品を選択し、
Manual Language
ドロップダウン
メニ
ューから
Japanese
を選択してください。
© 2009 Hewlett-Packard Development Company, L.P. Printed in the U.S.
ENWW
Introduction
1
