3
SAFETY WARNINGS
SYMBOLS
In this manual and/or on the machine the following symbols are used:
Risk of electric shock. This tool is not provided with an insulated gripping surface.
Contact with a live wire will also make exposed metal parts of the tool live and shock
the operator.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and
refrigerators. There is an increased risk of electric shock.
Examine the work piece to avoid contact with hidden wiring. Thoroughly investigate the
work piece for possible hidden wiring before performing work. Contact with live wiring will
shock the operator.
Use clamps or another practical way to secure and support the work piece to a stable
platform. Holding the work by hand or against the body is unstable and may lead to loss
of control.
Do not force the tool. Use the correct tool for the job. The correct tool will do the job
better and safer at the rate for which the tool is designed.
Do not use the tool if the switch does not operate. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the tool from the air source before making any adjustments, changing
accessories, or storing the tool. Such preventive safety measures reduce the risk of
starting the tool unintentionally. Turn off and detach the air supply, safely discharge any
residual air pressure, and release the trigger before leaving the work area.
Store the tool out of the reach of children and other untrained persons. This tool is
dangerous in the hands of untrained users.
Denotes risk of personal injury, loss of life or damage to the tool in
case of non-observance of the instructions in this manual.
Wear hearing protection.
Wear safety goggles.
Contact with or inhalation of dust coming free during use (e.g.
lead-painted surfaces, wood and metal) can endanger your health
and the health of bystanders. Always wear appropriate protective
equipment, such as a dust mask. Always use proper dust
extraction during use.
Wear gloves.
