Be prepared for binding and bit
breakthrough. When these situations occur,
the drill bit has the tendency to grab the
workpiece. This action will kick the drill
opposite to the direction of drill bit rotation
and could cause loss of control when
breaking through material as you complete
drilling the hole. If you are not prepared, this
loss of control can result in possible serious
injury.
GENERAL
When servicing, use only identical
replacement parts. Use of any other part
may create a hazard or cause product
damage.
DO NOT use solvents when cleaning plastic
parts. Most plastics are susceptible to damage
from various types of commercial solvents and
may be damaged by their use. Use clean cloth
to remove dirt, dust, oil, grease etc.
Do not at any time allow brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc. to come in contact with
plastic parts. They contain chemicals that
can damage, weaken or destroy plastic.
DO NOT abuse power tools. Abusive practices
can damage the tool as well as the workpiece.
DO NOT attempt to modify tools or create
accessories not recommended. Any such
alteration or modification is misuse and
could result in a hazardous condition
leading to possible serious injury. It will also
void the warranty.
17
Have you read “POWER TOOL
SAFETY”, “DRILL SAFETY” and
“SYMBOLS” on pages 4,5 & 6 of this
manual? If not, please do it now before
you operate this drill. Your safety
depends on it!
Every time you use the drill you should
verify the following:
1.
SDS bit is secure.
2.
Oil level is full.
3.
Select to the function you want to
do before you engage in the
proposed operation
4.
All safety apparel. Safety Glasses
Safety Shoes. Safety Gloves. Ear
Defenders and Safety Hat are
being worn.
Failure to adhere to these safety rules
can greatly increase the chances of
injury.
WARNING
!
MAINTENANCE
WARNING
!