Installation instructions
en
31
2.
Insert the panels until a clicking sound is heard.
The arrow inside the panels must point upwards.
Position the groove on the panels above the corres-
ponding transverse rib on the red fastening part.
a
The panels are engaged.
3.
Check whether the left- and right-hand panels are
vertically aligned.
4.
If necessary, align the panels.
21.10 Removing and aligning the panels
WARNING ‒ Risk of injury!
Parts that are accessible during installation may have
sharp edges and may lead to cutting injuries.
▶
Wear protective gloves.
ATTENTION!
Unsuitable tools may damage the surface of the appli-
ance.
▶
Only use plastic tools.
▶
Do not use pointed or sharp tools.
1.
To do this, open the appliance door 60° and
slide a fastening element directly above the control
panel between the appliance door and the control
panel .
2.
To loosen the panel, close the appliance door
and at the same time press the fastening element
on the appliance door down and towards the panel
.
There may be noises when the panels are removed.
3.
Take hold of the panel on the side without the door
hinges using both hands and remove it.
4.
If necessary, press on the fastening elements again.
5.
Turn the adjustment screws for the fastening ele-
ments to the left or right to adjust the alignment of
the panels.
6.
Refit the panels.
7.
Remove any packaging material and adhesive film
from the cooking compartment and the door.
21.11 Removing the appliance
WARNING ‒ Risk of injury!
Parts that are accessible during installation may have
sharp edges and may lead to cutting injuries.
▶
Wear protective gloves.
Summary of Contents for NR4GR31 1 Series
Page 1: ...Microwave Oven User manual and installation instructions NR4GR31 1 NL4GR31 1...
Page 33: ......
Page 34: ......
Page 35: ......
