NEFF NR4GR31 1 Series, User Manual And Installation Instructions

Page: 30 / 36

en
Installation instructions
30
2.
To loosen the panel, close the appliance door
and at the same time press the fastening element
on the appliance door down and towards the panel
⁠.
There may be noises when the panels are removed.
3. Take hold of the panel on the side without the door
hinges using both hands and remove it.
4. If the fastening elements have become loose when
removing the panels, reattach them. Hook in the
fastening element at the bottom and press down at
the top until it is in place.
Attach the red fastening elements at the top.
Attach the green fastening elements at the bottom.
21.8 Installing the appliance
1.
Push the appliance in fully.
Do not kink or trap the connection cable, or route it
over sharp edges.
2.
Centre the appliance.
There must be an air gap of at least 3 mm between
the appliance and adjacent cabinets.
3. Screw the appliance into place.
21.9 Installing panels
WARNING ‒ Risk of injury!
Parts that are accessible during installation may have
sharp edges and may lead to cutting injuries.
▶ Wear protective gloves.
1. Position the left-hand and right-hand panels.