background image

en 

Customer Service

14

Fault

Cause

troubleshooting

LED 1 flashes in the LED display. The grease filters are saturated.

→ 

"Cleaning grease filters in the dish-

washer", Page 12

→ 

"Cleaning grease filters manually",

Page 12

LED 2 flashes in the LED display. The odour filters are saturated.

Change the odour filter.

Customer Service

If you have any queries on use, are unable to rectify
faults on the appliance yourself or if your appliance
needs to be repaired, contact Customer Service.
You can solve many problems yourself by consulting
the information on eliminating faults in this instruction
manual or on our website. If this is not the case, con-
tact our Customer Service.
We will always find an appropriate solution and try to
avoid unnecessary visits being made by a Customer
Service technician.
With any warranty claims we will make sure that your
appliance is repaired by trained Customer Service tech-
nicians using original spare parts, including after the
manufacturer's warranty has expired.
Function-relevant genuine spare parts according to the
corresponding Ecodesign Order can be obtained from
Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the
market within the European Economic Area.

Note: 

Under the terms of the manufacturer's warranty

the use of Customer Service is free of charge.

Detailed information on the warranty period and terms
of warranty in your country is available from our Cus-
tomer Service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.
The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.

Product number (E-Nr.) and
production number (FD)

You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
Depending on the model, the rating plate can be found:

¡

Inside the appliance (remove grease filters for ac-
cess).

¡

On top of the appliance.

Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.

Accessories

Only use original accessories. These have been made
especially for your appliance. Here you can find an
overview of your appliance's accessories and how to
use them.

accessories

Order number

CleanAir recirculation
module with easy-change
filter – cannot be regener-
ated, stainless steel

Z52JCC1N6

CleanAir recirculation
module with easy-change
filter – cannot be regener-
ated, stainless steel

Z52JCD0N0

CleanAir recirculation
module with easy-change
filter – can be regener-
ated, white

Z52JCC1W6

CleanAir recirculation
module with filter – can
be regenerated, white

Z52JCD0W0

Easy-change filter for cir-
culating-air mode – can-
not be regenerated

Z53XXB1X6

Filter for air recirculation
module – can be regener-
ated

Z50XXP0X0

Disposal

Find out here how to dispose of old appliances cor-
rectly.

Disposing of old appliance

Valuable raw materials can be reused by recycling.

1.

Unplug the appliance from the mains.

2.

Cut through the power cord.

3.

Dispose of the appliance in an environmentally
friendly manner.

This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.

Disposing of batteries

Batteries should be recycled in an environmentally
friendly manner. Do not dispose of the batteries in the
household rubbish.

Summary of Contents for I95CBS8W0 Series

























Reviews: