background image

Safety

 en

3

installed and discharge the exhaust gases
into the open through an exhaust gas sys-
tem (e.g. a chimney). With the extractor
hood switched on, air is extracted from
the kitchen and the adjacent rooms.
Without an adequate supply of air, the air
pressure falls below atmospheric pres-
sure. Toxic gases from the flue or the ex-
traction shaft are sucked back into the liv-
ing space.

Always ensure adequate fresh air in the
room if the appliance is being operated
in exhaust air mode at the same time
as a room air-dependent heat-produ-
cing appliance is being operated.

It is only possible to safely operate the
appliance if the pressure in the room in
which the heating appliance is installed
does not drop more than
4 Pa (0.04 mbar) below atmospheric
pressure. This can be achieved
whenever the air needed for combus-
tion is able to enter through openings
that cannot be sealed, for example in
doors, windows, in conjunction with in-
coming/exhaust air wall boxes or by
other technical means. An incoming/
exhaust air wall box alone does not en-
sure compliance with the limit.

In any case, consult your responsible
chimney sweep. They are able to as-
sess the house's entire ventilation
setup and will suggest the suitable
ventilation measures to you.

Unrestricted operation is possible if the
appliance is operated exclusively in air
recirculation mode.

WARNING ‒ Risk of fire!

¡

Fatty deposits in the grease filters may
catch fire.

Never operate the appliance without a
grease filter.

Clean the grease filters regularly.

Never work with naked flames close to
the appliance (e.g. flambéing).

Do not install the appliance near a
solid fuel heating appliance (e.g. wood-
or coal-burning) unless the heating ap-
pliance has a sealed, non-removable
cover. There must be no flying sparks.

¡

Hot oil or grease ignites very quickly.

Always supervise hot oil and fat.

Never extinguish burning oil or fat with
water. Switch off the cooking zone. Ex-
tinguish flames carefully using a lid, fire
blanket or something similar.

¡

When gas burners are in operation
without any cookware placed on them,
they can build up a lot of heat. A ventila-
tion appliance installed above the cooker
may become damaged or catch fire.

Only operate the gas burners with
cookware on them.

¡

Operating multiple gas hobs at the same
time generates a great deal of heat. A
ventilation appliance installed above the
cooker may become damaged or catch
fire.

Only operate the gas hobs with cook-
ware on them.

Select the highest fan setting.

Never operate two gas hobs simultan-
eously on the highest flame for longer
than 15 minutes. Two gas hobs corres-
pond to one large burner.

Never operate large burners of more
than 5  kW with the highest flame for
longer than 15 minutes, e.g. a wok.

WARNING ‒ Risk of burns!

¡

The accessible parts of the appliance be-
come hot during operation.

Never touch these hot parts.

Keep children at a safe distance.

¡

The appliance will become hot during op-
eration.

Allow the appliance to cool down be-
fore cleaning it.

WARNING ‒ Risk of injury!

¡

Components inside the appliance may
have sharp edges.

Carefully clean the appliance interior.

¡

Items placed on the appliance may fall
off.

Do not place any objects on the appli-
ance.

Summary of Contents for I95CBS8W0 Series

























Reviews: