Appliance door
en
29
5.
WARNING ‒ Risk of injury!
If the door locks are unsecured, the appliance door
may become detached.
▶
After attaching the appliance door, close the left-
and right-hand door locks.
Hold the screwdriver horizontally and use it to
push the door lock (black component) on each side
of the door downwards as far as it will go .
a
The door lock is closed.
19.3 Removing the door panes
To facilitate cleaning, you can remove the door pane.
WARNING ‒ Risk of injury!
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
Requirement:
The appliance door is detached.
1.
Lay the appliance door with the front side facing
down on a flat surface that is soft and clean.
2.
Undo and remove the left- and right-hand screws on
the appliance door .
3.
Carefully lift the inner pane upwards at an angle and
remove it in the direction of the arrow .
4.
Push down on the intermediate pane lightly around
, and carefully lift the retainer until you are able
to pull it out.
5.
Lift the intermediate pane from below and remove
it in the direction of the arrow .
6.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶
Do not use any harsh or abrasive cleaners or
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the door panes on both sides with glass
cleaner and a soft cloth.
7.
Dry the door panes and refit them.
19.4 Fitting the door panes
WARNING ‒ Risk of injury!
If a door pane or appliance door has not been installed
correctly, this is dangerous.
▶
Make sure that all of the door panes and the appli-
ance door have been correctly fitted before you
switch the appliance back on again.
