8
Extension
Connect:
•
L+ to left positive/hot output
•
L- to left negative/cold output
•
R+ to right positive/hot output
•
R- to right negative/cold output
Depending on which connector is used on the balanced source, use one of the connection diagrams shown below.
R–
R+
G
L+
L–
Euroblock
R–
R–
R+
R+
G
G
L+
L+
L–
L–
XLR
R–
R+
G
L+
L–
Jack input
Connect:
•
The G to the cable shield.
•
L+ to left signal output
•
R+ to right signal output
•
Finally connect L- and R- to G with a small piece of wire
To connect the input to a single ended/unbalanced source.
Unbalanced (RCA)
R–
R+
G
L+
L–
RCA
The connector marked “RCA” is a unbalanced line level audio input. Connect
your audio source here with an RCA cable.
White input is left channel, red input is right channel.
USB audio connector
The connector marked “USB Audio-in” is a USB audio digital input. Connect
the source using a USB-A to USB-B cable. Source is typically Solvo by Neets,
a UC system or a Laptop.
AC input connector
Mains power (100 – 240VAC) is supplied through this connector.
USB STIK
ILLUSTATION
AC STIK
ILLUSTATION