14
Audio input settings
Audio input settings are used to adjust settings for Wake-on-signal settings.
All commands start with: NEUNIT=1,SETTINGS=INPUT, followed by the command in <A>, the value after the
equal sign must be replaced with the value in <X> or a question mark, all commands must end with a \CR.
Description
<A>
<X>
Default <X>
R/W
Set wake-on-signal function
on or off. This applies for all
inputs
WOS=<X>
ON or OFF
OFF
R/W
Example of use:
Audio output settings
Audio output settings adjust Sound Bar equalizer output parameters.
All commands start with: NEUNIT=1,SETTINGS=OUTPUT, followed by the command in <A>, the value after
the equal sign must be replaced with the value in <X> or a question mark, all commands must end with a
\CR
Description
<A>
<X>
Default <X>
R/W
Select equalizer preset
EQ=<X>
1 – 3
1
R/W
Example of use:
NEUNIT=1,SETTINGS=OUTPUT,EQ=1\CR
<- Select equalizer preset 1.
NEUNIT=1,SETTINGS=OUTPUT,EQ=2\CR
<- Select equalizer preset 2.
NEUNIT=1,SETTINGS=OUTPUT,EQ=3\CR
<- Select equalizer preset 3.
NEUNIT=1,SETTINGS=OUTPUT,EQ=?\CR
<- Query the equalizer preset.
