Page 2 of 14
Foreword
This document describes how to install and operate the Neets Control – QueBec Pro.
COPYRIGHT - All information contained in this manual is the intellectual property and copyrighted
material of Neets. All rights are reserved. You may not allow any third party access to content,
information or data in this manual without Neets’ express written consent.
CHANGES - Neets reserve the right to change the specification and functions of this product
without prior notice.
Questions, AFTER reading this manual, can be addressed to your local distributor or:
Neets A/S
Langballe 4
8700 Horsens
Denmark
by E-Mail: [email protected]
or you may use our contact form at www.neets.dk
Revision list
This document has the following revision changes:
Author: Date
Description
Pages
Rev
DB: 29-03-2017
First release
All
1.00
DB: 18-05-2017
Specifications corrected
2, 5, 6,
8, 11, 13
2.00
DB: 24-05-2017
Specifications corrected
6
3.00
What is in the box?
When you open the box it will contain the following items:
• 1 x Neets Control – QueBec Pro
• 4 x Terminal connectors
• 2 x Screws and plugs for wall mounting Ø4 x 60 mm
• 2 x Screws for mounting on Neets Rack Shelf, M4 x 35 mm.
• 4 x Adhesive feet
• This manual
Note that PoE power injector is not included. Use the PoE Injector (Part num ber: 302-000508).
!
