Page 11 of 14
LAN
PoE IN
PN: 312-0020
RS-232/IR
G
T2
R2
G
T1
R1
Relays
ww
w
.neets.dk
I/O
G
1
2
in
1
2
HDMI
out
in 1
in 2
in 3
out
VGA
RS-232 connectors
The onboard RS-232 ports T1 + R1, T2 + R2 can be used for two-way
communication with external RS-232 compatible devices. Alternatively, all
Tx ports can act as IR transmitter ports.
All of the RS-232/IR ports can be configured in the Neets Project Designer
software either as RS-232 or as IR emitter.
LAN connectors with PoE functionality
The LAN connector is used to connect the QueBec Pro to the local area
network. The QueBec Pro has Power over Ethernet functionality built into
both the LAN interface connectors.
You must connect the QueBec Pro to your LAN if you are using any of the
LAN features of the product. The ports features auto MDI-X which means
that you can connect the LAN ports directly to other devices without the
need for a LAN switch.
The connector marked with PoE IN is used to power up the entire con-
trol system. To power the QueBec Pro, use a PoE enabled switch which
complies with IEEE802.3af. Or you can use the PoE Injector (Part number
302-000508).
There are two LEDs on each connector with the following indication:
Color
Off
On
Blink
Yellow
No Link
Link
Activity
Green
10 Mbit
100 Mbit
LAN
PoE IN
PN: 312-0020
RS-232/IR
G
T2
R2
G
T1
R1
Relays
ww
w
.neets.dk
I/O
G
1
2
in
1
2
HDMI
out
in 1
in 2
in 3
out
VGA
