background image

5

EN

2  Safety information

Safety instructions

2.1  Documentation

Compliance with the following safety instructions and the specific national safety regu-
lations and health & safety provisions is a basic requirement for trouble-free and safe 
use of the laser. Therefore, please read carefully through these operating instructions 
and all notes and follow them while working with the laser.

2.2  Laser radiation

The Primus 2 H rotating laser is, depending on the version, a Class 2 or Class 3R laser 
product in accordance with EN 60825-1:2014.

     

LASER RADIATION

DO NOT STARE INTO BEAM

LASER CLASS 2

   

EN 60825-1:2014

”

 

 1mW

Ȝ

: 630-680 nm

ij”

1,5 mrad

     

LASER RADIATION

AVOID DIRECT 

EYE EXPOSURE!

LASER CLASS 3R

   

EN 60825-1:2014

”

 

 5 mW

Ȝ

: 630-680 nm

ij”

1.5 mrad

General safety instructions for handling laser radiation

WARNING!

 

 

f

Laser radiation can damage the eyes.

 

f

Prevent direct eye exposure to the beam.

 

f

Do not direct the beam at other people/animals or into public areas.

 

f

To prevent reflections, do not point the laser at reflective surfaces.

 

f

If possible, do not operate the laser at eye level.

 

f

The housing of the laser may be opened by trained service technicians only.

The emitted laser radiation has the following properties:

• 

Class 2 Power P 

”

  1mW / Class 3R Power P 

”

 5mW

• 

Wavelength 

Ȝ

: 515 nm

• 

Beam divergence 

ij”

 0,3 mrad

NOTE

For users in Germany:
Please note and follow the regulations of the body responsible for industrial safety and 
insurance (Berufsgenossenschaft) BGI 832 on the operation of laser equipment and 
BGV B2 on accident prevention. We recommend registering operation of a class 3R 
laser with the relevant Berufsgenossenschaft. Information can be found in §5 of BGV 
B2 and section 2 - Annex 5 of BGI 832.

Summary of Contents for TUBUS 2

























Reviews: