23
EN Operating Instructions
9.2 Acoustic warning signal
Laser beam
Description
Continuously
on
Referencing finished,
target tilt is set
Uniform
flashing
Laser is referencing itself or moving to the target tilt.
Please wait..
Irregular
flashing
Laser is in manual mode.
Symbol
Description
Sleep-mode display on the remote control:
Laser is in standby mode.
Remedy:
Use the remote control to disable the
laser’s standby mode
Infrared display on the remote control
If the radio connection is disrupted the unit switches to
infrared communication automatically.
Note:
Setting of the horizontal, or in manual mode the horizon-
tal and vertical, laser position only is possible.
Error 01 - Error 05
Noncorrectable unit error!
Remedy:
Send in the laser for a service.
9.3 Warnings of the laser beam
End position reached
An acoustic warning signal is emitted if the horizontal adjustment range,
or in manual mode the horizontal and vertical adjustment range, is ended.
The end position has been reached.
Remedy:
Move the laser beam in the opposite direction. If necessary, change the
position of the unit to reach the target point and then re-align the laser
beam. The warning signal goes out as soon as the limit switch is no
longer touched.
Displays in the control panel display
Summary of Contents for TUBUS 2
Page 1: ...EN Operating Instruction...
