Nederman SAVE 73009058, Original User Manual

Page: 26 / 44

SAVE EN
26 QMM095(A)
Status Status description
Not running Machine is not working / SAVE Controller not started.
Idle
Machine is working and communication between SAVE Module and SAVE
Controller is incorrect (interference occur).
Disconnected Machine is not working for a long time.
Table 5-3: Damper status
Status Status description
Closed Damper is closed.
Opened Damper is open.
Supplemental Emergency damper is open to ensure min. airflow velocity.
5.3.2 Overview
The operator has an overview of the system savings on the main screen, see Fig.
9 . The view shows actual data for saved electrical power, HVAC power saved,
and money saved.
Information about telephone number of Nederman Service is also available on
the main screen.
5.3.3 Savings
An additional icon Savings has been created so that the user can see in detail
how savings are generated in a given week, year or in total (see Fig. 10 ). The
values are also presented by chart.
5.3.4 Performance
On the System Performance page, you can check whether the correct
communication between specific SAVE Modules (they are assigned an ID) and
the SAVE Controller is ensured (see Fig. 11 ). If the readings are highlighted in red,
there is a problem with communication (see Fig. 18 ). Check the communication
requirements in the Installation and Service Manual.
Power consumption, frequency and other graphs are also presented.
5.3.5 Settings
The parameters are set during the first commissioning by installers. This
view shows details about extraction, dampers, flushing, damper and general
information (see Fig. 12-17) .
The changes in some parameters can be done by clicking on “ Unlock ” button
and write password (delivery in envelope with product), see Fig. 15 .
The user can change the value of the cleaning parameters (Fig. 15 ), such as
cleaning duration, delay time, and by unchecking or checking the check box of
clean in sleep mode and clean on startup.
In ‘General’ tab (Fig.
16 ) the user can provide actual electrical cost in kW, see
the software version and change the language and currency if needed.
NOTE!
Others parameters which cannot be unlock by User password can be
changed only by Nederman Service.