Nederman FlexPAK Series, Installation And Service Manual

Page: 13 / 29

FlexPAK
3.3 Technical data
Table 3.1 Technical data
FlexPAK
Power 18,5 kW (25 hp) 18,5 kW (25 hp) 21,5 kW (29 hp)
Mains voltage/frequency 230 V±10%/50–60 Hz 400 V±10%/50–60 Hz 460 V±10%/50–60 Hz
Maximum flow
1300 m
3
/h (765 cfm) 1300 m
3
/h (765 cfm) 1300 m
3
/h (765 cfm)
Flow at -15 kPa
1000 m
3
/h (588 cfm) 1000 m
3
/h (588 cfm) 1000 m
3
/h (588 cfm)
Flow at -20 kPa
800 m
3
/h (470 cfm) 800 m
3
/h (470 cfm) 800 m
3
/h (470 cfm)
Maximum vacuum -35 kPa (-5,1 psi) -35 kPa (-5,1 psi) -35 kPa (-5,1 psi)
Filter area
6 m
2
(64,5 sqft) 6 m
2
(64,5 sqft) 6 m
2
(64,5 sqft)
Weight 439 kg (968 lb) 439 kg (968 lb) 439 kg (968 lb)
Inlet/outlet diameter
(flanged)
150/160 mm
(7,87/6,29")
150/160 mm
(7,87/6,29")
150/160 mm
(7,87/6,29")
Sound level 70 dB(A) 70 dB(A) 70 dB(A)
Ambient temperature
range
0 – +40 °C (32–104 °F) 0 – +40 °C (32–104 °F) 0 – +40 °C (32–104 °F)
Process air temperature 0 – +60 °C (32–140 °F) 0 – +60 °C (32–140 °F) 0 – +60 °C (32–140 °F)
Relative humidity Max. 85% Max. 85% Max. 85%
Compressed air 6–10 bar (87–145 psi) 6–10 bar (87–145 psi) 6–10 bar (87–145 psi)
Material recycling 93,6% per weight 93,6% per weight 93,6% per weight
Maximum installation
altitude
1000 m above sea level 1000 m above sea level 1000 m above sea level
Corrosion class according
to ISO 12944-2
C2 according to ISO
12944-2
C2 according to ISO
12944-2
C2 according to ISO
12944-2
Supply voltage to ex-
ternal equipment
24 VDC ±15% 24 VDC ±15% 24 VDC ±15%
Protection class IP42 IP42 IP42
13