Nederman FE860, User Manual

Page: 13 / 75

FE860
1 Preface
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
NOTE!
Notes contain other information that is import-
ant for personnel.
2.2 General safety instructions
WARNING! Risk of fire and explosion
• Do not use the product for flammable or ex-
plosive dust and gases.
• Do not use the product in an environment
where there is a danger of explosion, or
where there is dust or gases in explosive con-
centrations.
• If the product has been used for dust applic-
ations, do not use it for welding fumes or
grinding dust.
• Do not use the product for extracting toxic
substances (except welding fumes).
• Only use the product in a well-ventilated
room.
• In case of fire, smoke from the product may
contain hazardous substances such as burn-
ing polycarbonate, PVC, polyethylene, etc.
Also, hazardous smoke from the separated
dust may occur depending on the material
being separated.
• In case of fire, disconnect power to the
product at the mains. Use a fire extinguisher,
minimum class AB.
• Check that no sparks or objects that can
cause fire are sucked into the nozzle. For
welding applications generating a high
amount of sparks, spark protection (access-
ory) must be mounted inside the coarse sep-
arator to reduce the fire risk.
WARNING! Risk of personal injury
Only properly trained personnel are allowed to
use this product.
CAUTION! Risk of equipment damage
Store FE860 indoors in a dry environment.
3 Description
FE860 is a portable welding filter that filters out pollutants such as fumes and dust, class W3 (non-alloy steel to
high alloy steel with nickel and chromium > 30%).
NOTE!
Gases are not filtered out.
See Figure 5 .
EN
13