Exhaust Hose Reel
EN
12
Reels for trucks
125/150 mm (5”/6”) hose: 800 - 1200 m3/h (470 - 700 cfm)
WARNING!
Risk of explosion.
The reel must not be used for other purposes than exhaust extraction.
6
Directions for use
Operating the hose and fan
Aim the hand control towards the indicator of the hose reel. The hand control will only operate
the one reel that has been correspondedly coded (remote controlled reel only).
Push the down-button
•
The fan starts at the upper limit for the hose. Started fan is indicated by fixed green light.
•
The hose moves downwards which is indicated by fixed red light. Release the button when
the required hose length has been coiled out.
WARNING!
Risk of severe personal injury.
•
Check that there is enough suction in the exhaust hose before it is connected to the vehicle’s
exhaust pipe. If not, check the fan’s rotation direction and/or damper function. If necessary
check installation of fan start switch.
•
An exhaust gas detector is recommended.
Push the up-button
•
The hose moves upwards which is indicated by fixed red light. Release the button at
required upper hose position.
•
The fan stops only at the upper limit for the hose.
7
Operating the fan
•
Short push on the down-button: The fan starts. Is indicated by fixed green light.
•
Short push on the up-button: The fan stops. The indication changes to flashing green light.
7.1
Stand by / power on:
Is indicated by flashing green light.
7.2
Indicator signals
See figure 8.
A.
Limit positions for the hose should be set.
B.
The hose moves downwards or upwards.
C.
The fan is in operation.
D.
Stand by. Power on.
