NED
XCM6040SAT4 UME-xxxx-00
22
22
The pin assignment of the power supply connector is shown below.
Figure 3-3-4 Power Supply Connector (HIROSE : HR10A - 7P- 4S)
Round shape push-pull lock type
Table 3-3-2 Pin Assignment of Power Supply Connector
No
NAME Color
of
Cable
1
12 -15V
White
2
12 -15V
Red
3
GND Green
4
GND
Black
3.4 Power Supply
The camera requires a single power supply (DC+12 to +15V).
When selecting a power source, choose one with extra capacity to
allow for in-rush current. (15W or more recommended)
Insert the cable plug securely until it locks into position. This is to prevent the
connector from becoming loose during power transmission.
Acceptable Cable (Acceptable plug):
DGPS -10 (HIROSE : HR10A -7P - 4S)
Power supply voltage:
DC+12 -15V (+/-5%)
Consumption Current (rated):
DC+12V : 500mA
LED lamp illuminates when +12V to +15V power is being supplied to the
camera.
If the lamp fails to illuminate even after power is supplied, turn OFF power
immediately. Inspect wiring. Check the voltage and capacity of the supplied
power source.
1
2
4
3
