NED
XCM6040SAT4 UME-xxxx-00
14
14
2 Camera Setting and Optical Interface
2.1 Setting Camera
Use the M4 screw holes or the screw hole for a tripod to set the camera.
The optional mounting base (sold separately) is available.
2.2 Fixing Camera
Use the M4 screw holes (4 places at front, 8 places at side) to set the
camera.
Or use the 1/4"-20UNC screw hole for a tripod (1 place at bottom).
If using the front panel M4 mounting holes, the screw length for fixing the
camera at the front should be less than 8mm, and less than 6mm for the side.
No X-, Y-axis orientation and tilt adjustment mechanism is available. Please
prepare an adjustment mechanism as necessary.
