NED
UME-0001-04 XCM6040SAT4
17
Use two cables of the same length and the same manufacturer. If you use
asymmetric Camera Link cables, connect the camera with the connector
labeled as ”Camera side”.
(2) Connect with a power supply.
Use a power cable to connect the camera with the power source for the
camera. Insert the plug end of the cable into the camera. Attach the opposite
end (loose wires) to the power unit.
Other than those above, a personal computer, a frame grabber board, a
taking lens, a lens mount, a light source and an encoder are necessary,
depending on the situation
。
Figure 3-1-1 Connections between Camera and Frame Grabber Board and Power Supply
There are two connectors available for the Camera Link Medium
Configuration board. Always check the frame grabber board specifications
before making connections.
PC
Camera Link
Medium
Configuration
Frame Grabber
Board
Line Scan Camera
(XCM 6040SAT4)
Camera Link Cable
(3M:14B26-SZLB-xxx-0LC)
Power Cable
Camera Power
Supply
DC +12V 15W
CL1
CL2
CL1
CL2
