67
NED
XCM2080SAT4
/
XCM2040SAT4
UME-0006-04
8.5.2.4 Setting Timeout
１）
Input each timeout value in the edit-box.(unit :ms)
When
you will click on the “Default” button, the value will be reset to the cameras
default values.
The meanings of each timeout are as follows.
First Receive:
The maximum time from sending a command to receiving the
first data.
Next Receive:
The maximum time between a letter and the next one.
Send:
The maximum time until finishing sending a command.
２）
Click “OK” button.
Click “Cancel” button when stopping setup.
Note: The camera can be used without this operation after it has been set up
correctly.
8.5.3.Connect
Click button B. Then you can control the camera. (See
“8.6.Control”)
Click the
“Memory Dump” button to acquire the current data of the camera.
