background image

SPARE PARTS LIST: 

1. 

Firebricks: (9) x 234mm x 118mm x 40mm 

2. 

Baffle Plate: Steel 440mm x 250mm x 6mm 

3. 

Brick Retainer: Steel 410mm x 345mm 

4. 

Glass Seal: 1080mm x 8mm x 3mm 

5. 

Glass: 333mm x 195mm x 5mm Pyro Ceramic Glass 

6. 

Door Rope: 900mm x 13mm round braided ceramic rope 

 

 

 

WARRANTY 

Pecan Engineering Pty. Ltd. warrants this stove to be able to operate under normal use and service and within 10 years from the 
date of the original purchase on the terms herein shall repair or replace without cost to the original customer any part thereof 
which shall be returned to our factory, transportation charges prepaid and which our inspection shows would prevent operation.  

This warranty does not apply to firebricks, brick retainer, baffle, door seal, glass, nor discolouration of the surface or tarnishing of 
chrome fittings all of which require normal service to maintain them. 

Under the terms of this warranty, Pecan Engineering Pty. Ltd. assumes no responsibility for the labour costs involved in removing 
or replacing the stove. Nor shall Pecan Engineering Pty. Ltd. be liable for any injury, loss, or damage (direct, indirect or conse-
quential) arising out of the use or inability to use the product, or its removal and replacement. All other stove warranties, ex-
pressed or implied are excluded to the extent possible to law. Any claims against Pecan Engineering Pty. Ltd. must be brought 
within Australian Jurisdiction. 

 

The Retailer does not have the authority to alter this warranty.

 

 

 

 

 

MANUFACTURER NAME & ADDRESS: 

Pecan Engineering Pty. Ltd. 

13 Acorn Road 
Dry Creek 
South Australia, 5094

 

Summary of Contents for Nectre 15









Reviews: