These measurements are achieved with the fitting of a ½ round stainless steel flue reflector. The fitting of a
splash back does not alter these measurements.
Floor Protection: Non Combustible
: All floor coverings must be trimmed to the minimum dimensions
above.
Combustible:
A minimum 12mm thick fire cement sheet – Optional covered in tiles.
Alternatives – Bricks (or concrete to a minimum 50mm) laid on a sheet of galvanised iron
MINIMUM WALL CLEARANCES & FLOOR PROTECTION REQUIREMENTS
100
125
100
350
300
265
750
350
•
All measurements in mm
•
Refer to detailed page on reducing wall clearances
965
Seismic restraint tabs
350
350
650
950
950
650
750
1350
min. floor
protection
shown by
dotted line
1350
PDF created with pdfFactory trial version
www.pdffactory.com
