Necta Koro Espresso, Installation, Use And Maintenance Manual

Page: 37 / 100

Programming menu summary
The machine can function in 3 different operating modes:
- Normal vending mode
- Filler menu
- Technician menu
In order to access the programming menus, press the programming button located on the push-button card:
© by N&W GLOBAL VENDING SpA
0512 264 - 00
33
At this point the machine goes into Filler menu mode.
The buttons shown in the figure are used for surfing through the different menus:
Scrolling buttons UP ( ) and DOWN ( )
The UP and DOWN scrolling buttons are used for moving from one programming menu item to the next one, located in
the same level, and at the same time change the status or the numeric value of the corresponding functions.
Confirm / enter button ( )
The confirm / enter button is used for moving to the lower level or for confirming a value after being entered or changed.
Exit button ( )
The exit button is used for returning to the higher level or for exiting a change field of a function. When reaching the
highest level in the menu, this button is pressed for going from the Technician menu into the Filler menu and vice versa.