2
WARNINGS AND SAFETY PRECAUTION
WARNINGS AND SAFETY PRECAUTION
The NEC MultiSync Multimedia monitor XV29 is designed and manufactured to provide long, trouble-
free service. No maintenance other than cleaning is required. Use a soft cloth and if necessary, mild
detergent. Do not use commercial spray cleaners, which may damage the surface. In case of
damage, arrange for repairs at an authorized NEC Service Center. For operating safety and to avoid
damage to the unit, read carefully and observe the following instructions.
To avoid shock and fire hazards:
1. Provide adequate space for ventilation to avoid internal heat buildup. Do not cover vents or install
in a closed cabinet or shelves. A cabinet or shelves in which the unit is placed
must be
maintained
below 40°C.
2. Do not use the power cord polarized plug with extension cords or outlets unless the prongs can be
completely inserted.
3. Do not expose unit to rain or moisture.
4. Avoid damaging the power cord, and do not attempt to modify the power cord.
5. Unplug unit during electrical storms or if unit will not be used over a long period.
Do not open the cabinet, which has potential dangerous high voltage components inside. If the
unit is damaged in this way the warranty will be void. Moreover, there is a serious risk of electric
shock.
6. Do not attempt to service or repair the unit. NEC is not liable for any bodily harm or damage
caused if unqualified persons attempt service or open the back cover. Refer all service to
authorized NEC Service Centers.
To avoid damage and prolong operating life:
1. Use only with 100-l 20V 60Hz AC power supply. Continued operation at line voltages other than
100-l 20V Volts AC will shorten the life of the unit and might even cause a fire hazard.
2. Handle the unit carefully when moving and do not drop.
3. Locate set away from heat, excessive dust and direct sunlight.
4. Protect the inside of the unit from liquids and small metal objects. In case of accident, unplug the
unit and have it serviced by an authorized NEC Service Center.
5. Unplug unit before cleaning. Use only a soft cloth and mild detergent. Commercial household
sprays and cleaners may damage the CRT surface and cabinet.
6. Stacking limit is two units high without external bracing.
