![background image](http://html1.mh-extra.com/html/nec/xen-master/xen-master_system-hardware-manual_4082722226.webp)
NEC Australia Pty Ltd
Xen Master & Xen Axis
7 - 208
Installing Optional Equipment
A6-3
240
00-6
42-
01 –
R
e
leas
e 4
.0
M
a
y
20
01
3.4.1
Installing the CTA-UA Unit
1.
Unplug the telephone cord from the Multiline
Terminal.
2.
Prepare Multiline Terminal for adapter installation.
Refer to Section 2 Preparing Multiline Terminal for
Adapter Installation.
3.
Plug the unit into the receptacle connector inside the
base plate on the Multiline Terminal. Refer to Figure
7-16 Attaching the Unit to the Multiline Terminal.
4.
Close the base plate.
3.4.2
Connecting the Cables on the CTA-UA Unit
Connect the RS-232C cable from the computer to the
connector on the CTA-UA Unit as shown in Figure 7-24
Connecting the RS-232C Cable to the CTA-UA Unit on the
Multiline Terminal.
Figure 7-23 Attaching the Unit to the Multiline Terminal
Figure 7-24 Connecting the RS-232C Cable to the CTA-UA Unit on the Multiline
Terminal