![background image](http://html1.mh-extra.com/html/nec/xen-master/xen-master_system-hardware-manual_4082722206.webp)
NEC Australia Pty Ltd
Xen Master & Xen Axis
6 - 188
Installing DTU-Type Multiline Terminals
A6-3
240
00-6
42-
01 –
R
e
leas
e 4
.0
M
a
y
20
01
S
ECTION
6
I
NSTALLING
L
INE
C
ARDS
AND
P
LASTIC
P
ANELS
6.1
Line Card and Plastic Panel Installation
Line Cards can be used to print the line key designations. These are
then placed on the Multiline Terminal providing a quick reference of
key designations to the Multiline Terminal users. The Line Cards
can be changed as necessary. The Plastic Panel is placed on top of
the Line Card to hold it in place.
1.
Place the Line Card over the keys on the Multiline Terminal.
2.
Place the tabs on the bottom of the plastic panel into the
grooves at the terminal bottom, and press top right and left
ends to secure plastic panel to the Multiline Terminal. Refer to
Figure 6-12 Installing Line Card and Plastic Panel on a
Multiline Terminal and Figure 6-13 Installing Plastic Panel.
Figure 6-12 Installing Line Card and Plastic Panel
on a Multiline Terminal
Figure 6-13 Installing Plastic Panel