background image

24

Appendix

The "Fast Startup" function allows quick computer startup from the power-off state. The 
"Fast Startup" function is enabled by factory default.

Before installing or removing a peripheral, disable the "Fast Startup" function as 
follows and shut down the computer.
If the "Fast Startup" function is still enabled and if you install or remove a peripheral 
device, the device may not be detected by the system.

1

Click [Desktop] on the start screen.

2

Display the charm bar on the desktop, and click [Settings].

3

Click [Control Panel].

4

Click [System and Security] and then select [Change what the power 
buttons do] from the [Power Options].

5

Select [Change settings that are currently unavailable].

6

Uncheck the [Turn on fast startup (recommended)] box of [Shutdown 
settings].

7

Click [Save changes].

We recommend that a "recovery drive" be created for times when problems such as 
corrupted files result in Windows not loading correctly.

1

Click [Desktop] on the start screen.

2

Display the charm bar.

3

Click [Settings].

4

Click [Control Panel].

5

Click [System and Security].

6

Click [Action Center].

7

Click [Recovery].

8

Click [Create a recovery drive].

9

When the [User Account Control] is displayed, click [Yes].

10

When the [Create a recovery drive] screen appears, check to see that 
[Copy the recovery partition from the PC to the recovery drive.] box is 
select, and then click [Next].

11

When [Connect a USB flash drive] is displayed, connect the USB memory 
to the computer.

12

When [Select a USB flash drive] is displayed, click [Next].

13

When [Create the recovery drive] is displayed, check its contents and click 
[Create].

14

When [The recovery drive is ready] is displayed, click [Finish].

15

Remove the USB memory from the computer.

Now, the recovery drive has been created.

Disabling the "Fast Startup" function

Creating a recovery drive

• An 8GB or larger USB memory is required to create a recovery drive.
• Existing data is erased from the USB memory. Back up the required data in advance.
• You can use the "recovery drive" only for the computer on which you have created 

this drive.

Do not operate even if a notification is shown at upper right of the screen.

Do not select the [Delete the recovery partition] option.

Summary of Contents for VersaPro VC





























Reviews: