background image

Getting Started   2-9

Handling the Battery

Review the following before handling the system battery.

Use the NiMH or Li-Ion batteries only in the NEC Versa VXi

computer for which they are designed. Mixing other NEC Versa VXi batteries, other
manufacturer’s batteries, or using a combination of very old and new batteries can
deteriorate battery and equipment performance.

!

 

Turn off power to the system after use.

!

 

Clean the battery terminals with a dry cloth if they get dirty.

!

 

When not in use, store the battery in a cool dry area.

The following symptoms indicate that battery life is nearing an end. Discard batteries
that display these symptoms:

!

 

shorter work times

!

 

discoloration, warping

!

 

hot to the touch

!

 

strange odor.

Extending Battery Life

The NEC Versa VXi NiMH or Li-Ion battery life is effected by the following
conditions:

!

 

When it is new and fully charged.

!

 

When no peripherals are connected to your NEC Versa VXi.

!

 

When you have no options installed.

Enabling power management features increases battery life.

While on the road, it is important to be aware of the simple things you can do to extend
the life of the system’s main battery. Turning down the screen brightness (

Fn + F9

)

extends battery life.

Summary of Contents for VERSA VXi






















































































































































































Reviews: