NEC VERSA TXI Manual Download Page 79 | Manualshive

Page: 79 / 181

background image

Using the Operating System and Utilities 4-11

!

Install — Clicking the Install button installs the selected software.

!

View — Clicking the View button displays installation instructions for those
utilities that are not installed using the A&D CD utility.

!

Exit — Clicking the Exit button closes the Application and Driver CD dialog box.

Installing the A&D CD Software

Once the Application and Driver CD dialog box appears, follow these steps to install
the desired software.

1.

Click the selection tab of your choice.

2.

Click the desired application, driver, or utility.

3.

Click the Install button to install your selection.

Follow the on-screen instructions to install your selection.

4.

Click Exit to close the Application and Driver CD dialog box.

5.

Remove the CD from the CD-ROM drive when the installation is complete.

NEC Info Center

The Application and Driver CD contains the NEC Info Center, a fully navigational
online document that provides information for the traveling professional and an online
version of portions of the printed user’s guide.

Installing the NEC Info Center

To install the NEC Info Center simply follow the instructions, presented earlier in this
chapter, for launching the A&D CD and installing the software. For the most current
version of the

NEC Versa TXi User’s Guide

, periodically check the NEC Computers

web site at

www.neccomp.com

.

Uninstalling the NEC Info Center

Use one of the following methods to uninstall the NEC Info Center.

!

Use this method to uninstall the NEC Info Center using the Windows Add/Remove
Programs feature.

1.

Go to Start, Settings, Control Panel, and double click Add/Remove Programs.

2.

Use the scroll bar, if necessary, to display the NEC Info Center item.

«
...
77
78
79
80
81
...
»

Summary of Contents for VERSA TXI






















































































































































































Reviews:

No comments

Related manuals for VERSA TXI

DCF-650W - Air Wireless CompactFlash Cf 802.11B...

Brand: D-Link Pages: 28

Brand: AES Pages: 2

Brand: YOKOGAWA Pages: 2

Brand: Ampetronic Pages: 2

USB202 VIDEO/AUDIO TO USB 2.0 ADAPTOR

Brand: Atlona Pages: 26

Brand: Nektar Pages: 2

LUXOMAT IR-RC-Adapter

Brand: B.E.G. Pages: 4

Brand: Plantronics Pages: 12

Brand: Intermec Pages: 12

Brand: Targus Pages: 8

PCIe to ExpressCard Adapter

Brand: SIIG Pages: 8

Brand: Belkin Pages: 44

Brand: Belkin Pages: 2

Brand: Belkin Pages: 32

Brand: Belkin Pages: 42

Brand: Belkin Pages: 52

Wireless G Router

Brand: Belkin Pages: 111

Baseus C-C3UEHVMSDC35

Brand: ALZA Pages: 46

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands