NEC VERSA TXI, Manual

Page: 75 / 181

Using the Operating System and Utilities 4-7
Using the NEC Customize Utility
Follow these steps to use the NEC Customize utility.
1.
Double click the NEC Customize icon.
2.
From the display window, select the desired option.
3.
Click Launch or Install to initiate the selected option.
4.
Follow the on-screen instructions to process the selected option.
For some of the selected options you are prompted to reboot your system.
5.
If necessary, click Exit to close the NEC Customize dialog box.
PHDISK Utility for Windows 98 SE
The PHDISK utility for Windows 98 SE configures your NEC Versa system’s save-to-
file (STF) area on the hard disk drive. This allows you to use your system’s power
management features to automatically save open files when your system hibernates.
To set up PHDISK use the information in the following sections.
Note
For more details about the PHDISK utility, see the ReadMe.txt file in the
necutils\phdisk directory.
Preparing Your System for the PHDISK Utility
Before running the PHDISK utility, verify that:
!
All appropriate drivers have been installed from the NEC Application and
Driver CD.
(For information about installing all appropriate drivers displayed in the Drivers
Table Interface on the NEC Application and Driver CD, see “NEC Application and
Driver CD.”)
!
No devices listed under Device Manager are flagged with a yellow exclamation
point.
(To check the Device Manager, press Start, and click Control Panel. Double click
the System icon and click the Device Manager tab. Check each device listing,
expanding the sub-items if necessary, to be sure no devices are tagged with yellow
exclamation points.)
If these two conditions are not met before you install the PHDISK utility, Hibernate
will not work correctly, and your hard drive may become corrupted.