background image

First Printing — April 2001

Copyright 2001

NEC Computers Inc.

15 Business Park Way

Sacramento, CA  95828

All Rights Reserved

Proprietary Notice and Liability Disclaimer

The information disclosed in this document, including all designs and related
materials, is the valuable property of NEC Computers Inc. (hereinafter “NECC”) and/or its licensors.
NECC and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to
this document, including all design, manufacturing, reproduction, use, and sales rights thereto, except
to the extent said rights are expressly granted to others.

The NECC product(s) discussed in this document are warranted in accordance with the terms of the
Warranty Statement accompanying each product. However, actual performance of each such product
is dependent upon factors such as system configuration, customer data, and operator control. Since
implementation by customers of each product may vary, the suitability of specific product
configurations and applications must be determined by the customer and is not warranted by NECC.

To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without prior
written approval of NECC is prohibited.

NEC is a registered trademark, Versa is a registered trademark, and VersaBay and VersaGlide are

trademarks of NEC Corporation and/or one or more of its subsidiaries. All are used under license.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation. Intel and Pentium are registered trademarks and Celeron and SpeedStep are trademarks of
Intel Corporation. All other trademarks and registered trademarks are the property of their respective
owners.

Summary of Contents for VERSA TXI






















































































































































































Reviews: