NEC V302H User Manual Download

Page: 90 / 110

... English

Appendices

Problem: Message Reminders



Over temperature - the projector has exceeded its recommended

operating temperature and must be allowed to cool down before it
may be used.

WARNING! TEMPERATURE TOO HIGH

1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED.
2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C



Replacing the lamp - the lamp is about to reach its maximum
lifetime. Prepare to replace it soon.

WARNING! LAMP

LAMP WARNING
LAMP LIFE IS ABOVE LIMIT TIME. LAMP OFF!

WARNING! LAMP

LAMP WARNING
LAMP LIFE EXCEEDED.

NOTE: When you continue to use the projector for another 100

hours after the lamp has reached the end of its life, the projector

cannot turn on.
If this happens, after replacing the lamp, connect the power cord

and then press and hold the HELP button on the remote control at

least 10 seconds. This will allow you to turn on the projector. Clear

the lamp hours by selecting “OPTIONS” -> “LAMP SETTINGS” ->

“CLEAR LAMP HOURS” from the menu.



Fan failed - the system fan is not working.

WARNING! FAN LOCKED

THE PROJECTOR WILL SWITCH OFF AUTOMATICALLY.

Summary of Contents for V302H















































































































Search results

Summary of Contents for V302H

Reviews:

Related manuals for V302H

Brands by name

Popular brands

NEC V302H, User Manual

Search results

Summary of Contents for V302H

Reviews:

Related manuals for V302H

Brands by name

Popular brands