18
English ...
Introduction
Step 3: Start Virtual Remote Tool
Start using the shortcut icon
Start from the Start menu
Click [Start] -> [All Programs] or [Programs] -> [NEC Projector
User Supportware] -> [Virtual Remote Tool] -> [Virtual Remote
Tool].
When Virtual Remote Tool starts for the first time, “Easy Setup”
window will be displayed.
The “Easy Setup” feature is not available on this model. Click
“Close Easy Setup”.
Closing the “Easy Setup” window will display the “Projector
List” window. Click “Close”. This will display the Virtual Remote
screen. To connect the projector, register an IP address manually.
TIP:
• The Virtual Remote Tool screen (or Toolbar) can be displayed without
displaying “Easy Setup” window.
To do so, click to place a check mark for “Do not use Easy Setup next
time” on the screen.
When “NORMAL”
is selected for
“STANDBY MODE”
from the menu, the
projector cannot
be controlled via
the serial cable or
network (wired LAN)
connection..
