NEC Univerge SV8100, Features & Specifications Manual

Page: 1100 / 1174

Issue 5.0 UNIVERGE SV8100
1 - 1090 Voice Mail Integration (Analog)
16-01-04 Department Group Basic Data
Setup – Hunting Mode Set if an unanswered call should
hunt once stopping at the last
member tried (0) or continually
hunt through the idle members (1). 0 = Last extension is
called and hunting is
stopped
1 = Circular
(default = 0)
16-01-05 Department Group Basic Data
Setup – Extension Group All
Ring Mode Operation Set if all members of the group
should ring automatically (1) or
through the use of the service
code (0) defined in Program
11-12-09. Selecting automatic will
override the settings of Programs
16-01-03 and 16-01-04. 0 = Manual
1 = Automatic
(default = 0)
16-01-06 Department Group Basic Data
Setup – STG Withdraw Mode Use to set the STG withdraw
mode for each department group. 0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
(default = 0)
16-01-07 Department Group Basic Data
Setup – Call Recall Restriction
for STG Determine whether or not an
unanswered call transferred to a
Department Group should recall
the extension from which it was
transferred. 0 = Disable (Recall)
1 = Enable (No Recall)
(default = 0)
16-01-09 Department Group Basic Data
Setup – Department Hunting No
Answer Time Set how long a call rings a
Department Group extension
before hunting occurs. 64800 (seconds)
(default = 15 seconds)
16-01-10 Department Group Basic Data
Setup – Enhanced Hunt Type Set the type of hunting for each
Extension (Department) Group. 0 = No queuing
1 = Hunting When
Busy
2 = Hunting When Not
Answered
3 = Hunting When
Busy or No Answer
(default = 0)
16-02-01 Department Group Assignment
for Extensions Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Department Groups
1-64
Priority 1-512
Default = All
extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision Enable (1) disconnect supervision
for the system. 0 = Disable
1 = Enable
(default = 1)
20-03-01 System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode For a busy single line (500/2500
type) telephone, set the mode
used to answer a camped-on trunk
call. The default setting should be
used [0 = Hookflash (Hooking)]. 0 = Hookflash
(Hooking)
1 = Hoo
Service Code 894
(default = 0)
Program
Number
Program Name Description/Comments Assigned Data