CHAPTER 5 FEATURE DESCRIPTION
UNIVERGE NEAX 2000 IPS General Description
Page 133
Issue 5
Silent Monitor-UCD
This feature provides the UCD group supervisor with the ability to monitor a call to a UCD
agent. The silent monitor function gives no indication (as an option) to either the agent or
the calling party.
Uniform Numbering Plan (UNP) -Voice and Data
In the numbering plan for a network to be configured through the use of Tie Lines, a Uniform
Numbering Plan (UNP) is employed. When UNP is employed, a station user from any PBX
within the network can call a desired party by using a uniform dialing method based on the UNP.
Variable Timing Parameters
This feature gives the IPS the versatility to change timing duration using the Maintenance
Administration Terminal (MAT) or the Customer Administration Terminal (CAT). All timing
parameters are set initially in the Resident System Program. These timing parameters can be
changed according to the customer's requirements.
Voice Guide
This feature provides a station user with an announcement that informs:
1. The result of the operation when the station user set or canceled the service feature,
instead of service set tone.
2. Which service has been set to the station; such as, Call Forwarding - All Calls, Do Not
Disturb or Message Waiting, when the station goes off-hook, instead of special dial tone.
Voice Mail Integration
This feature is used to interface the
UNIVERGE
NEAX
2000 IPS with a locally provided stand-
alone type Voice Mail System (VMS). The VMS, connected to the
UNIVERGE
NEAX
2000 IPS
single line circuit (LC), is controlled by sending/receiving DTMF signals using this LC.
The VMS’s voice mail feature can be used by accessing this VMS directly from an extension. If
a station sets its call forwarding destination to the VMS, calls to this station are connected to the
VMS, and the messages can be registered according to the VMS instruction. In addition, the
Message Waiting lamp of the station can be turned on automatically by the VMS.
Voice Mail Private Password
Voice Mail Password can be prevented from displaying in LCD of Multiline Terminals when
connected to the Voice Mail System.
Voice Mail Transfer
This feature has two functions that provide streamlined transfer access to voice mail.
1. One touch access to VMS: When an Attendant transfers an external call to a station, and
if the station is busy or unanswered, the Attendant can transfer the call to a VMS by
dialing “9” or by pressing a function key provided for this feature.
2. Transferring Camp-On call to VMS: When an Attendant sets Camp-On to a busy
destination station for an external call, and if the destination station does not answer by
predetermined time, the call can be automatically transferred to a VMS.
Voice over IP - (H.323)
Voice over IP allows the system to transmit voice conversations over a corporate Intranet using
ITUT H.323 protocol.
Summary of Contents for UNIVERGE NEAX 2000 IPS
Page 43: ...CHAPTER 2 SYSTEM CONFIGURATION UNIVERGE NEAX 2000 IPS General Description Page 39 Issue 5...
Page 44: ...CHAPTER 2 SYSTEM CONFIGURATION UNIVERGE NEAX 2000 IPS General Description Page 40 Issue 5...
Page 86: ...CHAPTER 3 TERMINALS UNIVERGE NEAX 2000 IPS General Description Page 82 Issue 5...