NEC Univerge DT820, User Manual

Page: 94 / 134

88
Voice Announce Calls
1. Adjust the Speaker volume as needed.
Note 1:
On SV9100 if MIC key is not lit the
user cannot answer voice announce
calls without lifting the handset.
2. Respond hands free.
Note 2:
The handset may be used any time
during the conversation.
Camp-on (Call Waiting)
1. Receive the camp-on tone while on another call:
2. When a Camp On is set from another station,
complete the present call and a Call Back will ring
the station that set the Camp On.
3. When the Camp On station answers and rings the
phone, lift the handset or press the Speaker key.
Off Hook Signaling
With a call in progress:
1. Receive Off-Hook signaling.
2. Press the Answer key, then converse with the
second party.
Note 3:
The second call may be placed on Hold.
Note 4:
Press the flashing Line key or Conf key to
return to the first call.
Placing Calls
Internal Calls
1. Lift the handset.
2. Dial a station number or 0 (for attendant).
3. Voice announce after the tone burst, or wait for the
ringing call to be answered.
Outside Calls
1. Lift the handset.
2. Dial the trunk access code (i.e. 9).
-OR-
Press an idle Programmable Outside Line key.
3. Dial the telephone number.
4. Converse.
TALKING TO STA 12345
2-11 MON 10:56AM
Conf Rpt Save Trf
2142622000
Line 001 00:15
Conf Rpt Save Trf