manualshive.com logo in svg

NEC SuperScript 610, User Manual

Share
Download
NEC SuperScript 610 User Manual Download Page 21

SuperScript Software Installation    3–3

Some steps described below, such as disk
defragmentation, may not be necessary due to your
PC configuration. The installation description
provides a common approach. Your network
configuration may provide an alternate set of
selections, such as an installation folder. This section
describes the installation process and identifies the
few installation differences between the
configurations. For Server and Client installations,
normally the Server PC is installed first, then one or
more Client PCs.

NOTE: You must have a license for each PC Client
and PC Server installed.

Suggestion: If you are in the process of creating your
workgroup but haven’t successfully established a
workgroup environment, you should configure your
system so that peer-to-peer communication is
working before installing SuperScript software to
make verification of SuperScript interconnection
easier.

Summary of Contents for SuperScript 610










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands