Chapter 3 Operations of Performance Monitoring Function
I-46
(2) Thresholds
setting
On the Numeric Table screen, select the line (Note 1) or cell (Note 2) of the threshold monitoring element for
which you want to set a threshold. Then, select [Threshold Monitoring]
→
[Set Threshold] menu. The Set
Threshold dialog appears.
Figures 3-14 and 3-15 are display samples for setting a threshold by selecting the cell of I/O Density of the logical
disk number 0003h. Figures 3-16 and 3-17 are display samples for setting a threshold by selecting the line of
the logical disk number 0003h.
(Note 1) To select a line, left-click at the left end of the line.
(Note 2) To select a cell, left-click the cell.
Figure 3-14 Set Threshold Menu (Select a cell)
