NEC SpectraView Profiler 5 User Manual Download Page 78

Page: 78 / 79

Profiler

User Manual

6.1 Product information SpectraView Profiler 5

Copyright Information

The information in this manual is furnished for informational use only and is subject to change

without notice and shall not be construed as a commitment by basICColor GmbH. basICColor

GmbH assumes no responsibility or liability for inaccuracies or errors that may appear in this

document. No part of this user guide may be reproduced, transmitted, transcribed or trans-

lated into any language without the express written permission of basICColor GmbH.

Trademark Information

basICColor and the Fingerprint are a registered trademark of basICColor GmbH. All other

trademarks or registered trademarks are the property of their respective holders (Apple, Ado-

be, X-Rite, Konica Minolta Sensing, ColorPartner, Barbieri) Any mention of these trademarks

is for demonatrational use only and is not meant to infringe any rights of a third party.

Written by: Tim Seher,

Version 5.0.2, February 2012

Summary of Contents for SpectraView Profiler 5
















































































Search results

Summary of Contents for SpectraView Profiler 5

Reviews:

Related manuals for SpectraView Profiler 5

Brands by name

Popular brands

NEC SpectraView Profiler 5, User Manual

Search results

Summary of Contents for SpectraView Profiler 5

Reviews:

Related manuals for SpectraView Profiler 5

Brands by name

Popular brands