24
5-4. Connecting LED and SATA Cables
Connect the LED cable coming with the server to the HDD LED connector. For the connection, see the figure
and the connection table below. For the connection to the motherboard, refer to the User’s Guide of the
server. If it is hard to connect the LED cable, pull out the card from the PCI (or PCI Express) slot once and
connect the cable to the card.
Next, connect a SATA cable to the SATA connector on the card. The port number of the SATA cable should
be the same as that of the card.
1 2
LED cable
SATA cable
Connect the red cable to this
pin. (This is not used for a
single-line LED cable.)
Connect the black
cable to this pin.
HDD LED connector
LED cable connection table
LED cable (coming with server)
2-line cable
1-line cable
Pin 1
Connected with black cable Connected with black cable
HDD LED
connector
Pin 2
Connected with red cable
Not used
Notice
Depending on the type of the server, the LED cable has two lines or only
a single line.
To use the SATA2 HDD Cage, connect the SATA cable coming with the
cage to the card. For the detailed connection, refer to the User’s Guide
of the additional HDD cage.
To connect with the rack-mount type server, use the SATA cable coming
with the server. Refer to the User's Guide of the server for details.
