22
5-2. Selecting and Installing Bracket
The card is shipped with factory-installed full-height PCI bracket. To install the card on a low-profile PCI slot,
the full-height PCI bracket should be replaced with the low-profile PCI bracket.
1.
Remove the screws (2) fixing the full-height PCI bracket to the card.
2.
Remove the full-height PCI bracket.
3.
Install the low-profile PCI bracket on the card.
4.
Secure the low-profile PCI bracket with the screws (2) removed in step 1.
Full-height PCI bracket
Low-profile PCI bracket
Tips
Use the similar procedure to replace the low-profile PCI bracket with the
full-height PCI bracket.
5-3. Installing the Disk Array Controller
1.
Locate the PCI (or PCI Express) slot in which the disk array controller will be installed and remove
the additional slot cover.
Notice
Keep the removed additional slot cover for future use. The removed screw will be used
to install the card. Do not lose them.
The card does not support the PCI hot-plug feature. Before installing or removing the
card from the server, always power off the server and pull out the power cord from the
receptacle.
Check
Some limitation may be imposed to the installation on the PCI (or PCI Express) slot
depending on the type of the server. Before the installation, check the limitation following
the User’s Guide of the server.
2.
Insert the card into the PCI (or PCI Express) slot securely and fix it. To fix the card with screws, use
the screw removed from the additional slot cover.
