NEC PowerMate VT 300 Series Release Notes 5
2.
Double click the
Network
icon in the Control Panel window.
3.
Click the
Configuration
tab. In the Configuration display, the following
protocols are loaded:
NetBEUI Protocol
NWLink IPXSPX-Compatible Transport
NWLink NetBIOS
4.
Highlight
NWLink IPXSPX-Compatible Transport
and click
Remove
. A
warning window appears asking for confirmation to continue.
5.
Click
Yes
. The NWLink IPXSPX-Compatible Transport and NWLink
NetBIOS lines disappear from the Configuration display.
6.
Repeat steps 4 and 5 to remove the
NetBEUI
Protocol.
7.
In the Configuration tab display, click
Add
. Highlight
Protocol
and click
Add
.
8.
Highlight
Microsoft
and then
TCP/IP
and click
OK
. The TCP/IP Setup
window appears. If there is a DHCP server on the network, click
Yes
;
otherwise click
No
.
9.
Change the path in the window to
C:\I386
. Click
Continue
. The Network
window appears. If Yes was clicked in step 8, skip to step 16. If No was
clicked in step 8, the Windows Setup window appears.
10.
Click
Close
. The Microsoft TCP/IP Properties Box appears.
11.
Fill in the
IP Address
, the
Subnet Mask
, and the
Default Gateway
in the
“Specify an IP address” area.
12.
Click the
DNS
tab and enter the host and domain name in the DNS display.
13.
Click the
Identification
tab and change the Computer Name if appropriate.
14.
Click the
WINS
tab and enter the WINS address if appropriate.
15.
Click the
Routing
tab and enable IP forwarding if appropriate.
16.
Click
OK
. When prompted to restart the system, click
Yes
.
Setting Boot Order in BIOS
To use the CD-ROM drive as a boot device, the BIOS must list it before the
hard drive and/or before the network.
The system does not boot from a Zip
®
drive if it is listed as the first boot device.
