manualshive.com logo in svg

NEC POWERMATE VE - 03-1996, Manual

Share
Download
NEC POWERMATE VE - 03-1996 Manual Download Page 132

    

 7-8   24-Hour Information Services

COMPUSERVE ONLINE SERVICE

 If you subscribe to CompuServe, you can use the service to
obtain information about NEC and its products. You can
use CompuServe to E-mail technical questions to NEC’s
Technical Support staff, post technical questions and
messages on the Bulletin Board, and access NEC’s BBS.

 

NOTE

You cannot download information from the

NEC Bulletin Board from CompuServe. You must
call the NEC Bulletin Board directly using the
procedure explained earlier in this chapter.

 Use the following steps to access CompuServe and NEC’s
online information services.

1. 

Log onto CompuServe.

2. 

At the opening screen, click on Service, type in NEC
TECH at the prompt, and click OK.

3. 

At the NEC menu, double-click on one of the following
topics, then follow the prompts:

■  

NEC Bulletin Board

■  

Information About This Service

■  

Access NEC BBS

■  

Access CompuServe Information Services

■  

Exit.

4. 

Exit anytime by double-clicking on the rectangle in the
upper left corner of the screen.

 

Summary of Contents for POWERMATE VE - 03-1996












































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands