![background image](http://html.mh-extra.com/html/nec/powermate-ready-es-pro/powermate-ready-es-pro_user-manual_248714073.webp)
68 Solve problems
Solving common problems
Look here to match your problem area and review the possible causes
and solutions.
When trying to solve problems, remember to note what the system
was doing when the problem occurred and what you tried to do to
correct the problem. This information is useful if you later ask for
help.
System problems
No power and power lamp not lit
Check that the power cable is plugged into the system power
socket. Check that the other end of the cable is plugged into a
live, properly grounded AC power outlet.
System does not boot and error message displayed on
screen
Run the Setup Utility. Check that the parameters are set
correctly, particularly if you just installed an option.
System sounds continuous beeps
Turn the system off, wait at least five seconds, and turn the
system on. If the beeps continue, call your NECCSD dealer or
NECCSD Technical Support.
System does not boot from hard disk
The system tries to start from the diskette drive before it starts
from the hard drive. Remove the diskette from the diskette
drive.
Run the Setup Utility and check the Boot parameter settings
to verify that the initial boot parameter is set for hard drive C
and not for a diskette drive.
Summary of Contents for PowerMate Ready ES Pro
Page 105: ...Index 4 X X2 technology 39 40 ...